Lighting: Design or Specification information (for all light fittings and details of LED lights for bare pendant fittings)
Photovoltaic Specification: (design details to include panel outputs in watts and number of panels as well as details of a battery if appliable)
1. Foundations/substructure and ground floor, to show thermal continuity and quality of insulation in the following places.
1a. At ground floor perimeter edge insulation.
1b. At external door threshold
1c. Insulation below damp-proof course on external walls.
2. External walls: for each main wall type, to show thermal continuity and quality of insulation for the following.
2a. Insulation at ground floor wall junction
2b. Insulation at structural penetrating elements, Lintels, balconies etc
3. Roof: for each main roof type, to show thermal continuity and quality of insulation at the following.
3a. Insulation at Joist/rafter level
Please can we get an image of the insulation laid between/above the joists when the plasterboard for the ceiling is fitted.
3b. Insulation at eaves and gable edges
4. Openings: for each opening type (one image per wall or roof type is sufficient), to show thermal continuity and quality of
4a. Window positioning in relation to cavity closer or insulation line.
4b. External door set positioning in relation to cavity closer or insulation line
5. Airtightness: additional photographs for all details 1–4 to show airtightness details (only if not included or visible in continuity of insulation image)
6. Building services: for all plant associated with space heating, hot water, ventilation and low or zero carbon technology equipment within or on the building, show the following.
6a. Plant/equipment identification label(s), including make/model and serial number.
6b. Primary pipework continuity of insulation.
7. Mechanical ventilation ductwork continuity of insulation (for duct sections outside the thermal envelope).